Setting the new benchmark for freeride pants, the lofoten ACE Gore-Tex Vectran Pants are the perfect match with the lofoten ACE Gore-Tex Jacket. The extremely light and breathable material is so durable we could not even cut it with regular scissors when making the prototype.
The pants are made for powder days, high intensity and will always provide you with the best weather protection out there. To make the pants suitable for all conditions we have added three different bib solutions; a powder skirt, the regular zip off with suspenders and a full on vest with a tight fit, an assymetrical zipper and a pocket for a beacon.
Other critical features include our Custom-fit waist system™, snow gaiters, two cargo pockets and reinforcements at the bottom leg to protect against steal edges. The inside leg ventilation with mesh will ensure air flow when needed.
The metallic appearance will make you look awesome every time you wear the pants and is a result of a fabric so strong and durable it was impossible to dye. A must for the collector, a game changer for the freeriders and an ace within its segment.
NB: A change has been made after picture was taken, and the top right pocket is removed. Instead you will find a small vertical zipper opening for wearing a harness under the pants.
Also works well for
- Freeride skiing & snowboard
- Ski touring / Randonnée
- Skiing and snowboard
WindproofnessScale from 1 to 6 where 1 is not windproof and 6 is totally windproof.
WaterproofnessScale from 1 to 6 where 1 is not waterproof and 6 is waterproof.
InsulationScale from 1 to 6 where 1 has no insulating properties and 6 is our warmest insulation products.
BreathabilityScale from 1 to 6 where 1 have very little or no breathability and 6 is our most breathable and moisture wicking products.
DurabilityScale from 1 to 6 where 1 is fragile products and 6 is the most durable products we have.
LightweightScale from 1 to 6 where 1 is heavy and 6 is among the world's lightest of its kind.
Developed with GORE-TEX® fabric with Vectran fibers. Products with this fabric is setting the absolute benchmark among strength in freeride clothing. The extremely light and breathable material is so durable we could not even cut it with regular scissors when making the prototype at our RD&D lab.
Read more at GORE-TEX®
Aramid lower leg reinforcement
Aramid is a heavy duty fiber that is difficult to dye, so it will always have the same color
Custom-fit waist system™
Inside mesh phone pocket
Kevlar reinforced inside ankles
On the inside of the ankles there are reinforcement with Kevlar for strong durability
Soft brushed inside waist
The waist have a soft brushed fabric inside to increase comfort
Gaiters inside the legs to prevent snow from coming in
Taped seams with thin GORE-TEX® 13 mm tape
This means that the seams are taped, and that we use a special thin 13mm seam tape from Gore-Tex® to make it perform great and keep you dry without adding too much weight to the product.
X-open inside thigh zip vent
The thighs have a zipper on the inside with YKK water resistant zippers for great ventilation. The opening have a mesh to prevent snow coming in.
Zip-in Bib solution
This product comes with the Norrøna Bib that is attachable to the pants for adding a suspender and front pocket to the pants. Also prevents snow coming in, and increased comfort.
Zipper opening leg/ankle
Zip-seal system™ to connect jackets and pants together