Free shipping in Europe - no minimum

Waterproof freeride pants with an urban look and a 3-layer GORE-TEX® membrane for men. These pants have the same design and outer fabric as the classic røldal Gore-Tex PrimaLoft pants, but without the insulation, which makes them slightly more technical. They’re better equipped for active freeriding as they have good breathability as well as the classical details like ventilation options on the side, practical pockets and water resistant zippers. These pants will protect you against the elements of nature while looking good. Inseam length in size L = 87 cm. Length differs 2 cm per size up and down.

  • Windproofness6
  • Waterproofness6
  • Insulation2
  • Breathability3
  • Durability4
  • Light weight3

Areas of use

Freeride skiing & snowboard, General outdoor use

Weight 871 gr. | Model nr. 5611-15
    • Open

      A durable GORE-TEX® fabric suitable for a wide range of activities. In the 3-layer construction, the membrane is laminated to the lining on one side and to the outer fabric on the other, providing enhanced durability. Lighter than a 2-layer GORE-TEX® fabric, since it requires no additional free-hanging liner. Technical specification: Waterproof: min. 28,000 mm* Breathablility: High, down to 9 RET** Windproofness: 100% * ISO 811-test ** ISO11092-test

      Read more at GORE-TEX®

    • Open

      Washing your GORE-TEX® and dri products will prolong the life of the product. This is how you should wash GORE-TEX® and dri products: Remember to close all zippers and Velcro. The garment should be washed at 40 degrees without spinning, with a mild detergent and no softening or rinsing agents. Do not use bleach. Softeners, rinsing agents and bleaches can damage the fabric’s water-resistant properties (not the membrane/waterproofing) and the color of the fabric. Rinse the garment twice, if possible. Use water repellent spray on the outside of the garment after washing for optimal water-resistance (this has nothing to do with the waterproof quality of the garment, but makes it easier for water to roll off the outer fabric). Dry the garment on a low setting in the dryer, if you like, or iron it at a low temperature. Warmth helps to reactivate the waterproofing. The garment must be dry before washing and before being put away.

      Washing and product care

  • Technical details Open