Our most versatile all season waterproof and breathable jacket for mountaineering juniors. Light enough for summer use and durable enough for winter use.
This jacket is developed for all kinds of mountaineering activities. Made of a specially developed GORE-TEX® fabric with a comfortable, slightly brushed backer.
The jacket has a short cut,with critical features including long underarm vents, above harness pockets, a storm hood fitted for helmet and asymmetric cuffs for better weather protection.
We recommend stashing your cell phone in the designated pocket on the inside of the jacket, in order to prevent moisture damage.
The pockets are placed so it is accessible while using a backpack with hip belt.
The Gore-Tex fabric is 20 Denier.
Other areas of use
- General outdoor use
- Ski touring / Randonnée
- Glacier walking
WindproofnessScale from 1 to 6 where 1 is not windproof and 6 is totally windproof.
WaterproofnessScale from 1 to 6 where 1 is not waterproof and 6 is waterproof.
InsulationScale from 1 to 6 where 1 has no insulating properties and 6 is our warmest insulation products.
BreathabilityScale from 1 to 6 where 1 have very little or no breathability and 6 is our most breathable and moisture wicking products.
DurabilityScale from 1 to 6 where 1 is fragile products and 6 is the most durable products we have.
LightweightScale from 1 to 6 where 1 is heavy and 6 is among the world's lightest of its kind.
Oeko-Tex Certified Fabric
Oeko-Tex Certified FabricOeko-Tex® is a worldwide consistent, independent testing and certification system which secures chemical use is in line or surpassing national and international regulations and standards.
Open Factory List
Open Factory ListThis product is made in a factory openly listed on norrona.com.
Inspected factoryThis product is made in a factory inspected by an independent third party and followed up by Norrøna.
A durable GORE-TEX® fabric suitable for a wide range of activities. In the 3-layer construction, the membrane is laminated to the lining on one side and to the outer fabric on the other, providing enhanced durability. Generally lighter than a 2-layer construction. Technical specification: Waterproof: min. 28,000 mm* Breathablility: High, down to 9 RET** Windproofness: 100% * ISO 811-test ** ISO11092-test
Read more at GORE-TEX®
Washing instructions Gore-Tex and dri
Washing your GORE-TEX® and dri products will prolong the life of the product. This is how you should wash GORE-TEX® and dri products: Remember to close all zippers and Velcro. The garment should be washed at 40 degrees, with a mild detergent and no softening or rinsing agents. Do not use bleach. Softeners, rinsing agents and bleaches can damage the fabric’s water-resistant properties (not the membrane/waterproofing) and the color of the fabric. Rinse the garment twice, if possible. Use water repellent spray on the outside of the garment after washing for optimal water-resistance (this has nothing to do with the waterproof quality of the garment, but makes it easier for water to roll off the outer fabric). Dry the garment on a low setting in the dryer, if you like, or iron it at a low temperature. Warmth helps to reactivate the waterproofing. The garment must be dry before washing and before being put away.
Washing and product care
Hand pockets above harness and hip belt
Hand pockets are placed so it will not conflict with harness and hip belt. This means they are a bit higher than on a non-technical jacket. Having pockets that interfere with a harness or hip belt make it discomfortable, and hard to reach what you have inside the pocket.
For improved movability and flexibility
Asymmetric cuffs with velcro adjustment
Internal chest pocket
This product has an internal chest pocket for keeping smaller stuff in place.
One-hand hood adjustment
This one adjusts the hood for a perfect fit, and is made to be easily operated with one hand for quick adjustments. Also made to work with ski gloves.
Soft brushed chin protection
This product have taped seams instead of having stitches through the fabric. This is mostly used on products that are wind- or waterproof. Also creates a smooth comfort on the inside of the product.
Storm hood fitted for freeride helmet
The hood is fitted for wearing a freeride/alpine helmet. With the one-hand adjustment at the back of the hood, it will also fit great without a helmet.
X-open side zip ventilation with YKK water resistant zippers
Under arm ventilation with YKK water resistant zipper that has two zipper pullers for maximum versatility when ventilating.
YKK™ 2-way water resistant front zipper
Water resistant (not waterproof) zipper which can be opened two ways. Top down or bottom up through the two different gliders. The zipper is produced by the well known zipper maker YKK.