Free shipping in Europe - no minimum

These durable, silent, light weight and waterproof dri™3 pants are made for mountain hunting with all its weather, terrain and rough nature. We have constructed a special fabric with brushed polyester face fabric and a soft and durable dri membrane. Features like side ventilations, hand warmer pockets, water resistant YKK zippers, two bellow pockets, velcro closure around ankles with silicon grip and gaiter hook. The pants will also be a good choice for forest hunting if you like 3-layer products. Unisex for men and women. Inseam length in size L = 87 cm. Length differs 2 cm per size up and down. Women should choose one size smaller than normal for this product.

  • Windproofness6
  • Waterproofness6
  • Insulation3
  • Breathability3
  • Durability5
  • Light weight5
  • Stretch3

Areas of use

Forest hunting, Mountain hunting, Trekking, Expedition

Weight 500 gr. | Model nr. 6411-14
    • Open

      dri™3 is a 3-layer, ultra-thin, stretchy, non-porous, hydro­philic membrane that provides high levels of waterproofness and breathability. Technical Specifications: Waterproof: 20,000 mm * Breathability: Very Good, min. 20,000 ** Windproofness: 100% * ISO811-test ** JIS-L 1099 B2-inverted cup test

    • Open

      Washing your GORE-TEX® and dri products will prolong the life of the product. This is how you should wash GORE-TEX® and dri products: Remember to close all zippers and Velcro. The garment should be washed at 40 degrees, with a mild detergent and no softening or rinsing agents. Do not use bleach. Softeners, rinsing agents and bleaches can damage the fabric’s water-resistant properties (not the membrane/waterproofing) and the color of the fabric. Rinse the garment twice, if possible. Use water repellent spray on the outside of the garment after washing for optimal water-resistance (this has nothing to do with the waterproof quality of the garment, but makes it easier for water to roll off the outer fabric). Dry the garment on a low setting in the dryer, if you like, or iron it at a low temperature. Warmth helps to reactivate the waterproofing. The garment must be dry before washing and before being put away.

      Washing and product care

  • Technical details Open